Bucket elevator E
Bucket elevator is manufactured from galvanized material (275 g/m2) in accordance with the EU Machinery Directive 2006/42/EC, EU Low Voltage Directive 2014/35/EU and EN ISO 12100:2010.
Bucket elevator is intended for vertical transportation of free-flowing materials used in agricultural, food and other industries.
In order to achieve maximum flow rate and maintain continuous operation, all elevators are calculated on matched capacities principle.
Models give the following capacities based on grain with 15% moisture content, bulk density 750 kg/m³, at specified belt speed. Please notice that every 1% increase in moisture content above 15% decreases capacity by 3-4 %.
Standard delivery includes:
- Drive section with direct fitted NORD gearbox and motor (A)
- Outlet (B)
- Extensions (C)
- Extension joints (D)
- Extension with service door (E)
- Tension section (F)
- Inlet hopper (G)
- Inlet flange (H)
- Shaft speed monitor with cover (I)
- Backstop with cover (J)
- Antistatic elevator belt with stell buckets, bolts and nuts.
Bucket-elevators_manuals.pdf
e_data_sheet_eng_FINAL-24-10-2023.pdf
