Equipment Chain conveyor K

Chain conveyor K, type Y

Chain conveyor is manufactured from galvanized material (275 g/m2) in accordance with the EU Machinery Directive 2006/42/EC, EU Low Voltage Directive 2014/35/EU and EN ISO 12100:2010.

Reverse flow Chain conveyor type Y is designed for horizontal transportation of free-flowing material in reverse direction from drive end by means of intermediate floor. At tension section flow is returned back to drive section. Such principle allows to use any inlet and divert flow to any outlet without continuous motor reversing.

In order to achieve maximum flow rate and maintain continuous operation, chain conveyor is calculated on matched capacities principle. It means, that chain conveyor theoretical capacity will be higher than elevators or feeding conveyors. Please see schematics at the end of price list.

Models give the following capacities based on grain with 15% moisture content, bulk density 750 kg/m³, at specified chain speed. Please notice that every 1% increase in moisture content above 15% decreases capacity by 3-4 %.

Standard delivery includes:

Tension section (A)
Inlet (B)
Flow return extensions with connection plates (C)
PEHD bottom wear out plates, t=10 mm
Chain, type FV
Drive section with direct fitted gearbox, motor, inspection window and overloading membrane (D)
Outlet (E)