Flight conveyor S, type B
Flight conveyor is manufactured from galvanized material (275 g/m2) in accordance with the EU Machinery Directive 2006/42/EC, EU Low Voltage Directive 2014/35/EU and EN ISO 12100:2010.
Trench Flight conveyor with bend type L is designed for horizontal and incline (up to 45⁰) transportation of free-flowing material from intake pits. Due to specifics of double-sided inlet and often used variable speed drive, additional power reserve is included in standard configurations.
In order to achieve maximum flow rate and maintain continuous operation, flight conveyor is calculated on matched capacities principle. It means, that flight conveyor theoretical capacity will be lower than elevators or filling conveyors. Please see schematics at the end of price list.
Models give the following capacities based on grain with 15% moisture content, bulk density 750 kg/m³, at specified chain speed. Please notice that every 1% increase in moisture content above 15% decreases capacity by 3-4 %.
Standard delivery includes:
- Tension section (A)
- Double sided inlet sections (B)
- PEHD bottom wear out plates t=10 mm
- Drive section with direct fitted gearbox and motor (C)
- Outlet in corresponding angle (D)
- Overloading sensor (E)
- Chain with plastic flights.
FLIGHT-CONVEYOR-technical-data-sheet-1.pdf
FLIGHT-CONVEYOR_Manuals-1.pdf
